Wacker Neuson CRT 36-25 Operator's Manual

Contents

Wacker Neuson CRT 36-25 Operator's Manual Manual pdf 42 page image

wc_tx000640gb.fm42Maintenance CRT 364.16 TroubleshootingProblem Reason RemedyEngine does not start. Engine problem. Consult engine manufacturer’sservice manual.Machine out of balance; wobblingexcessively.Operator is over-steering. The movement of each gearbox iscontrolled by “stops” to providethe correct relationship of thecontrol arm movement to machinemovement. Excessive pressureon control arms in any directionwill not improve reaction time andcan damage steering controlscausing machine to wobble.Trowel arm(s) bent. Replace trowel arm(s).Trowel blade(s) bent. Replace trowel blade(s).Main shaft(s) bent due to machinebeing dropped.Replace main shafts(s).Poor handling; excessive range incontrol lever movement.Worn bushings due to lack oflubrication.Replace bushings and lubricate atleast every 20 hours.Control arm lever adjustment hasmoved or control arm has beenbent.Reset control arm lever.Lower control arm(s) bent. Thiscan be caused by droppingmachine.Replace lower control arm(s). Uselifting brackets and/or forkliftpockets provided on machine forlifting.