Introduction and overviewPage 1INTRODUCTION AND OVERVIEWThe Wacom® DTF-521 interactive pen display combines the benefits of a Liquid Crystal Display (LCD)with the control, comfort, and productivity of Wacom’s cordless, battery-free pen technology. This givesyou a direct pen-on-screen interface for your computer.The basic components of the DTF-521 include a Wacom pen tablet internally mounted behind a 15.0"diagonal TFT color display, and a Wacom pen.The DTF-521 also comes equipped with a VGA pass-thru (ANALOG RGB OUT) port, enabling you tosimultaneously connect a VGA monitor or projector to the pen display.This manual describes how to install the DTF-521 hardware and software. It also describes how to usethe DTF-521 and pen. Please follow all instructions carefully.The computer treats the DTF-521 as two separate devices (the display and the pen tablet).Therefore, the installation process is completed in two stages:• First install the DTF-521 as a display.• Then install the DTF-521 as a pen tablet.Both stages require hardware and software installations and adjustments. Please follow allinstructions carefully.IMPORTANT: You MUST install the Wacom pen tablet driver software for correct pen-on-screenfunctionality.To learn about using the Pen Tablet control panel to customize your pen display tablet and pen settingson Windows or Macintosh computers, seeCustomizing on page 19.The following kinds of information are not included with this product: information about your specificcomputer hardware or operating system, or information about your application software. Your bestsource for this information is the set of manuals and discs that came with your hardware, operatingsystem, or application.
