Waldorf IN8200E Installation And Operation Manual

Contents

10OperationOperation Guide1. Waldorf appliances have been designed to provide simplicity of operation.2. Improper operation is therefore almost impossible, however bad operation practices can reduce thelife of the appliance and produce a poor quality product. To use this appliance correctly please readthe following sections carefully.Description of Controls(Model IN8200E Shown)HI / LO Temperature Control KnobUsed to select hob required and to adjust the temperature setting for individual Hobs.Pan Detection / Power ‘On’ Lamp (Green)Illuminates and remains ‘On’ when a selected hob is turned ‘On’ and has a pan on the hob.If the hob is turned ‘On’ without a pan on the hob, the lamp will commence flashing until a pan is placedon the selected hob.Also used with the ‘Fault Lamp’ to display Generator Faults, refer to ‘Error Code Pattern’ in the ‘FaultFinding’ section.Fault Lamp (Red)Illuminates and remains ‘On’ when a fault is detected. The red fault lamp will remain ‘On’ until the fault isrectified. Refer to ‘Error Code Pattern’ in the ‘Fault Finding’ section.C AUTION : This appliance is for professional use and is only to be used by qualifiedpersons. Only qualified service persons are to carry out installation and servicingoperations. Components having adjustments protected (e.g. paint sealed) by themanufacturer should not be adjusted by the user / operator.HI-LO TemperatureControl Knob(Rear Hob)Fault Lamp (Red)Pan Detection / Power ‘On’ Lamp (Green)