Sound Parameters – Control Delay133 Waldorf Q User’s Manual• MAX Returns the maximum value of either Source #1 or Source #2. If Source #1 isgreater than Source #2, the value of Source #1 is returned and vice versa.Constant -64…+63Defines a value for modifier functions that require a constant parameter. See the Operationparameter described above for further details.Control DelayThis function offers a delay of a user-selected modulation source during a certain time period. Thisparameter can be found in the Modulation Matrix after the Modifiers. Additionally the Control Delaycan be used as Standard Modulation Source (M1S…M8S).Ctr.Delay| Source000 | offCtr.Delay 0...127Determines the amount of time delaying the selected modulation signal after a note is triggered.Previously, values would be reset to their default value. With this update, parameter changes are nowaudible. Please note that the Control Delay must be set as the Modulation Source in the ModulationMatrix for the Modulation Destination to be affected.Source see Table “Standard Modulation Sources” on page 60Selects the Modulation Source (and correspondingly its signal) which will be delayed.
