Walker B18 Operator's Manual
                                                                            | |
Contents
|
56Maintenance Instructions REPLACING/REPAIRINGEngine/PTO Belt1. To remove an engine/PTO belt:a. Remove wire lock pins (4), open beltguards.b. Relax belt by depressing idler arm.c. Roll the belt off the pulley and remove thebelt.Engine/PTO Belt (Belt Guards Open) (Engine Hidden for Clarity)2. To replace an engine/PTO belt:a. Reverse the removal procedure to replacean engine/PTO belt.b. Secure wire on lock pin above tab on lowerPTO guard.Engine/PTO Belt (Belt Guards Closed) (Engine Hidden for Clarity)PTO GuardEngine/PTO Belt(Matched Set)PTOPulleyRight HandGuardLower LHGuardUpper LHGuardIdler Arm Wire Lock PinWire Lock PinsSecure wireabove tab PTO GuardRight HandGuardUpper LHGuardLower LHGuard |
Related manuals for Walker B18
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine