Operating Instructions30ADJUSTING CUTTING HEIGHTCutting height is adjusted from operators seat usingthe height peddle to assist in raising the deck whilepositioning the height adjustment lever and hitchpin.1. Disengage PTO and stop tractor.2. Push down on height peddle until it latches in thefull up position.3. Select desired height by moving the hitch pin tothe desired height.4. Push down on the height peddle and lift up onthe height adjustment lever. Slowly release theheight peddle while lifting the lever until there isno pressure on the peddle.Cutting Height AdjustmentTransport Position1. Disengage the PTO.2. Push down on height peddle until it latches in thefull up position.Cutting Height Adjustment ComponentsWARNINGNever adjust cutting height while themower is moving. Before adjustingcutting height or servicing, move theForward Speed Control (FSC) into theNEUTRAL-PARK position, engage theparking brake, and disengage the bladeclutch (PTO). Tractor should not bemoving while adjusting cutting height.HeightAdjustment Lever Hitch PinHeight Peddle
