Operating Instructions27Transmission Lockout LeversThe transmission lockout levers disengage the hy-drostatic transmissons. By lifting the lever on top ofthe transmission and locking it into place with thelockout cam, the hydrostatic transmissions are re-leased to permit freewheeling. By releasing the camand lowering the lever, the transmissions are en-gaged for normal operation. The transmission leverin the LOCKOUT position is used to enable movingthe machine without the engine running (e.g., forservice). Refer to TRANSMISSION LOCKOUT inthis section for operating instructions.Lockout Lever LocationNOTE: The transmission plunger on the side of thetransmission case (activated by the LOCKOUT LE-VER) must be completely released during operationof the mower, otherwise operation of the transmis-sion will be erratic.Cold Start Lever (Jackshaft Drive Belt Release)The cold start lever is used for starting the machinein cold weather [below 40° F (4° C)]. Pulling the le-ver DOWN disengages the jackshaft drive belt.When the jackshaft drive belt is released, the hydro-static transmissions are removed from the enginestarter cranking load.Cold Start Lever - Normal Operating PositionCold Start Lever - Cold Start PositionTransmissionPlungerLockoutLeversJackshaft DriveEngagedJackshaft DriveDisengaged
