Specifications4MODEL MDDTRANSMISSION (continued)Service Brake Dynamic Braking through Hydrostatic TransmissionParking Brake Mechanical Pin Lock in Transmission GearNeutral Transmission Release by Manual Dump ValveFinal Drive Gear Drive AxleTransmission FluidFactory Service Mobil 1 Synthetic Motor Oil (15W50)Alternate Transmission Fluid SAE 30W Straight Viscosity Motor OilTransmission Fluid Capacity 1 qt (1 liter)Transmission Cooling Cooling Fan Mounted on Drive PulleyGround Travel SpeedForward m.p.h. (km/h)Reverse m.p.h. (km/h)0-5 (0-8) Infinitely Variable0-5 (0-8) Infinitely VariableBLADE DRIVEPTO Shaft Quick Disconnect Spline Shaft with Two High-SpeedU-JointsBlade Spindle Each Blade (2) Mounts Direct on Peerless Right Angle Gearboxwith Tee Gearbox in Center Connected to PTO Shaft (CompleteGeared Drive, Peerless Model 1000 Gearboxes)Blade Drive Clutch and Brake Manual Belt Tightener Clutch and Band Brake (Stops Bladeswithin Five (5) Seconds of Disengagement)Max. Blade Speed[25 in. (64 cm) Blade]@ 3600 RPM Engine2900 RPM [16700 FPM (5090 m/min)]TIRE SIZEDeck Caster Wheel 2.80/2.50-4 Pneumatic (4-Ply)Deck Caster Wheel (Optional) 8.25 x 2.75 Semi-PneumaticDrive 18 x 9.50-8 (4-Ply)Rear (Dual) 13 x 5.00-6 (4-Ply)TIRE PRESSUREDeck Caster Wheel 20 PSI (137 kPa)Drive 15 PSI (103 kPa)Rear 20 PSI (137 kPa)