WXR545PLTrailer Wood Splitter Safety SignsSafety173.2 Safety Sign Explanations1. CautionKeep feet away from falling split wood.Always wear steel toed foot wear whilemachine is operating to avoid seriouspersonal injury.2. CautionPinch point / crushing danger! Keepyour hands away from all movingparts during and after split operation!Never try to clear a jammed log withyour hands! Wait for all moving partsto come to a complete stop beforeloading or clearing obstructions.3. CautionRefer to the operator's manual.Read and understand ALL safetyand operating instructions. Read andunderstand ALL safety labels locatedon the machine.4. CautionPersonal Protective Equipment(PPE) is required when operating thismachine. Failure to wear PPE canresult in personal injury3.3 Replacing Damaged SafetySigns1. Keep safety signs clean and legible at all times.2. Replace safety signs that are missing or havebecome illegible.3. Parts that were replaced with a safety decal on themmust also have the safety sign replaced.4. Replacement safety signs are available from yourauthorized Distributor or Dealer Parts Department orthe factory.3.3.1 How to Install Safety SignsAmbient temperature must be above 50 °F (10 °C) toinstall decals.1. Clean and dry the installation area.2. Determine exact position before removing the backingpaper.3. Peel back the corner of the backing paper.4. Align the sign over the specified area and carefullypress the small portion with the exposed stickybacking in place.5. Slowly peel back the remaining paper and carefullysmooth the remaining portion of the sign in place.6. Small air pockets can be pierced with a pin andsmoothed out using the piece of sign backing paper.