Wallgate ALB-01 Product Manual
Also see for ALB-01: Manual
                    | |
Revision 316Product Manual ALB-01, 03 & 055.6. Technical SpecificationsBath only, Weight 70 KgDimensions, ±3mm 1696mm (L) x 499mm (H) x 748mm (W)Water Supply Minimum operating pressure 0.5 Bar (See note 1 below)Minimum recommended dynamic pressure 1 Bar (See note 2)Maximum rating 10 BarFlow rate 30 LPMSupply pipe size 22mm copperWaste connection 40mm (1½” pipe)Bath water volumes:1. Volume tooverflow.2. Volume whenwater depth inbath is 153mm.148 litres85 litresOptional Control Unit SpecificationsPower supply 230V AC 50/60Hz 2 Amp single phaseUSA / CANADA:120V AC 2Amp, 60Hz for models WDCA100 andWDCA200.Power rating Maximum power rating 60 WWeight 1.0 KgDimensions 200mm (W) x 150mm (H) x 80mm (D)Enclosure IP Rating IP53RegulatorycomplianceComplies with RoHS, LVD 2014/35/EU and EMC2014/30/EU directives.Table 1. Technical specificationsNOTE: The minimum operating pressure quoted is the minimum that the watersolenoid valves will operate at. At this minimum pressure the flow will be nogreater than 6 litres per minute & could potentially be a lot less dependingupon the size of feed pipes and type of water feed whether mains fed, orgravity system fed.NOTE: The recommended minimum dynamic pressure of 1 Bar will deliver aflow rate of 12 LPM with a suitably sized water feed pipe (min 22mm) andsupply. |
Related manuals for Wallgate ALB-01
manualsdatabase
Your AI-powered manual search engine