Wallgate ALB-01 Product Manual
Also see for ALB-01: Manual
                    | |
Revision 38Product Manual ALB-01, 03 & 051. Ensure product fixings are correctly fitted as detailed in the followinginstructions.2. Ensure all fixings are tightened to the recommended torque as detailed in thefollowing instructions.3. Seal the edges of the product to the wall and floor. Fill gaps between the bathpanels, the bath and the bath tap using anti-pick hard set mastic, examples ofrecommended types are:a. Arbokol 1025, manufactured by Adshead Ratcliffe & Co Ltd(www.arbo.co.uk).b. Sikadur 33 manufactured by SIKA Ltd (www.sika.co.uk)5.2.1. Installation Guidelines▪ The bath must be attached to a frame (see Fig. 1) mounted on a level floorsuitable for supporting the bath tub, water and occupant. See Table 1 forthe weight. Refer to Figures 2 and 3 for a typical installation of the bath.▪ Hot and cold-water supplies are necessary. See Table 1 for thespecifications of the water supplies.Figure 1. Wallgate bath support frame• Using the appropriate Bath Installation site orientation instruction sheet:ALB-01, ALB-03 or ALB-05.o Determine the position of the optional electronic control unit (seeFigure 4), position of services, cut any appropriate holes for water,waste and wiring. |
Related manuals for Wallgate ALB-01
manualsdatabase
Your AI-powered manual search engine