Waring Xtreme MX1300XTX Operating Manual

Also see for Xtreme MX1300XTP: Operating manual

Contents

2 3IMPORTANT SAFEGUARDSWhen using electrical appliances, basic safety precautions should always befollowed, including the following:1. READ ALL INSTRUCTIONS.2. To protect against risk of electrical shock, do not put appliance inwater or other liquid.3. Always unplug from outlet prior to handling or cleaning.4. This appliance is not intended for use by persons (includingchildren) with reduced physical, sensory or mental capabilities, orlack of experience and knowledge, unless they have been givensupervision or instruction concerning use of the appliance by aperson responsible for their safety.Children should be supervised to ensure that they do not play withthe appliance.5. Unplug from outlet when not in use, before putting on or taking offparts and before cleaning.6. Avoid contact with moving parts.7. Do not operate the Waring ® Blender or any other electricalequipment with a damaged cord or plug, or after the unitmalfunctions, or is dropped or damaged in any manner. Returnit to the nearest authorized service facility for examination, repair,or adjustment.8. The use of attachments, including canning jars, not recommendedor sold by Waring may cause fire, electric shock, or injury.9. Do not use outdoors.10. Do not let cord hang over edge of table or counter, or touch hotsurfaces.11. Keep hands and utensils out of jar while blending, to prevent thepossibility of severe personal injury and/or damage to the blender.A rubber spatula may be used, but must be used only when theblender is not running.12. CAUTION: Blade is sharp. Handle carefully.13. Always operate blender with lid in place.14. When blending hot liquids, remove center piece of two-piece cover.See hot blending instructions, page 8.15. The use of ear protection is recommended during extendedoperating periods.16. Do not leave blender unattended while it is running.17. See cleaning and sanitizing instructions, pages 9-11.NOT FOR WATERJET CLEANING.SAVE THESE INSTRUCTIONS1. Power On/Off Button - Pressing this button will turn the blender on andoff. When the unit is turned on, the blue LCD backlight will illuminate and willprompt user when the machine is ready for blending.2. Start/Stop Button - Pressing this button once while in standby mode willcause the blender to run. Pressing this button again will stop the blenderfrom running. NOTE: The blender should not be run without a container orwith an empty container.3. Speed Controls - Gradually increase or decrease the blending speedof the blender in 1% increments. The speeds range from 15% to 100%.The speed controls can also set the speed of the Norm Pulse function.NOTE: Speed settings will be saved when unit is turned off.4. Maximum Pulse Control - Pressing this button provides a quick burst ofspeed during a blending cycle. The MAX Pulse button will run the blender at150% power (30,000 RPMs).5. Normal Pulse Control - Pressing this button provides a quick burst ofspeed during blending cycles at speeds of less than 100%. The Norm Pulsebutton will run the blender at 100% power (20,000 RPMs).6. LCD Display - This window will display all operating messages with asharp blue LCD backlight.7. Program Buttons for Pre-set Beverage Stations - The blender comeswith 4 preprogrammed beverage stations. These stations consist of themost frequently blended kinds of drinks. All stations are reprogrammable toaccommodate the user’s preferences. See page 6 for details on this feature.CONTROL PANEL1645237