Page 6811. Confirm the setting and move to the next time to be modified by pressing the TimeProgramming button (4).12. When finished programming the off time, confirm the setting by pressing the TimeProgramming button (4) which will return the LCD to step 7 allowing another time slot tobe selected. To select a different day for programming, return to step 5 by pressing theMode button (3) for 1 second.13. Repeat the steps as required to modify the Time Slot ON and OFF time settings. Thesettings are saved and the LCD returns to the Home Screen when no button presses aredetected for a short period of time.14. It is possible to copy settings from one day to another, see Section 6.6.3.To disable a time Slot, set the ON and OFF times to the same value, ‘----‘ will be displayed asthe time setting once the off time is confirmed with the Time Programming button (4).6.6.3 Day CopyIt is possible to copy either CH or DHW settings from one specific day to another day.1. From the Home Screen, Press the Time Programming button (4) for 3 seconds2. The LCD will display ‘tinE’ representing Time. Note: This menu can only be accessedif the internal time programmer is enabled for CH or DHW. See sections 11.7.1 and11.7.2 for enabling the programmer.3. Press the DHW+ button (1) to select either DHW or CH Time Programming, the radiatoricon or tap icon will flash when selected.4. Press the mode button (3) for 1 second to enter the required Time Programming Menu.5. The word will flash. Use the DHW+ button (1) or DHW- button (2) to select theday to be copied.6. Press the DHW+ button (2) and Mode button (3) simultaneously for 3 seconds, the LCDwill display ‘COPY SrC’, the settings are copied into a temporary buffer.7. Press the Mode button (3) for 1 second to return to the day selector.8. Press the DHW+ button (1) or DHW- button (2) to select the required destination day.9. Press the DHW- button (1) and Mode button (3) simultaneously for 3 seconds, the LCDshows ‘COPY dSt’, the settings are copied to the destination day. It is possible to pastethe settings to multiple days as required by repeating these steps. The settings aresaved and the LCD returns to the Home Screen when no button presses are detected fora short period of time.
