User Guide 233Hardware DescriptionHardware DescriptionThe Firebox® X Edge e-Series has a simple hardware architecture. All indicator lights are on the frontpanel of the device, and all ports and connectors are on the rear panel.Front panelThe front panel of the Firebox X Edge e-Series has 18 indicator lights to show link status. The top indi-cator light in each pair comes on when a link is made and flashes when traffic goes through the relatedinterface. The bottom indicator light in each pair comes on when the link speed is 100 Mbps. If the bot-tom indicator light does not come on, the link speed is 10 Mbps.WAN 1, 2Each WAN indicator shows the physical connection to the external Ethernet interfaces. The lightis yellow when traffic goes through the related interface.LAN 0, 1, 2Each LAN indicator shows the physical connection to the trusted Ethernet interfaces.WAPThe WAP indicator shows that the Firebox X Edge e-Series is activated as a wireless access point.The light is green when traffic goes through the wireless interface on a Firebox X Edge e-SeriesWireless model.Fail OverThe Fail Over indicator shows a WAN failover. The light is green when there is a WAN failoverfrom WAN1 to WAN2. The light goes off when the external interface connection goes back toWAN1.LinkThe link indicator shows a physical connection to a trusted Ethernet interface. The trustedinterfaces have the numbers 0 through 2. The light comes on when traffic goes through therelated interface.100When a trusted network interface operates at 100 Mbps, the related 100 indicator light comeson. When it operates at 10 Mbps, the indicator light does not come on.
