Document #10-32813 Rev A; June 07, 2019 Page 23 of 69Configure Ethernet with DashboardBefore you beginIf you do not already have Dashboard on your machine, you will find it on the SD: drive of your RMA PLUS. Connect aMini-B USB cable to the RMA PLUS, eject the SD: drive to mount it to your PC, open the Software folder, open Dash-board folder, and then extract the Dashboard .zip files to a new directory on your PC. You may then launch Dash-board.exe from there.1. Launch Dashboard. The discovered RMA PLUS should be under the “USB Devices” tree node.Figure 18: Dashboard: USB Devices in Tree Node2. Expand the RMA PLUS to see basic device information.Figure 19: RMA PLUS Expanded in Tree Node3. Drag and drop the RMA PLUS tree node onto the Device Data pane to upload all parameters.Figure 20: Dashboard: Drag Device into Data Pane
