28 Ordering information28.1 Pump part numbers0 0 • • • • G • •MModel1: Remote3: Manual4: Universal5: Universal+7: PROFIBUSModel1: Qdos 202: Qdos 303: Qdos 604: Qdos 120Pumpheadorientation*L = LeftR = RightDigital I/O typeManual, Remote and PROFIBUS modelsL: Standard pump varientUniversal and Universal+ modelsL: Open collector outputs, 5 - 24V DC inputsH: Volt free 110V AC relay contacts, 110V AC inputs(only available with US mains leads)R: Volt free 110V AC 30V DC relay contacts, 5 - 24V DC inputsPlug optionsA: USE: EuropeanU: UKK: AustraliaR: ArgentinaC: SwissD: India, South AfricaB: BrazilTube material†2: Santoprene8: SEBS* The pumphead side location is required when ordering. The left/right perspectiveassumes the user is looking at the front of the pump. The pump in the dimensions diagramis considered a pumphead located to the left.Left hand mountedpumphead** Important note: The ReNu pumphead contains lubricant. It is the user’s responsibility tocomply with local health and safety regulations, including ensuring chemical compatibilitybetween the lubricant and the duty fluid before use. The standard lubricant is PFPE. Theqdos30 standard lubricant is silicone oil.† To choose the best tube for your duty fluid please use the chemical compatibility chart atwww.qdospumps.comm-qdos-en-02 123
