Watts Vision BT-A02 RF Description And Application Manual

Also see for BT-TH02 RF: User guide User guide User guide

Contents

Watts Vision BT-A02 RF Description And Application Manual Manual pdf 7 page image

12 133.1.4 Water floor heating (multi zones) with several BT-M6Z02 RFand pump management.Equipments:• 2 Connecting Boxes BT-M6Z02 RF• 2 (or more) Thermostats BT-D02 RF (or BT-A02 RF, or BT-DP02 RF)• 1 Central Unit BT-CT02 RF• OPTION – If necessary = in case manifold is too far from boiler:1 Receiver BT-WR02 HC RF to drive a boiler (or BT-WR02 RF to drivea pump)For a correct installation, refer to dedicated user guides of each product, then:WIRING CONNECTION:• Connect the actuators (eg. 22C – 22CX series) to the connecting box BT-M6Z02 RF• Connect the connecting box BT-M6Z02 RF (ZONE 1 ) to the heating relay of boileror• OPTION – if not possible (eg. the manifold is too far) connect a ReceiverBT-WR02 HC RF to the heating relay of boilerVIRTUAL – RF CONNECTION:1-2 Pair each thermostat to each zone of the BT-M6Z02 RF.One thermostat can drive several zones.3 Pair the two BT-M6Z02: In this configuration, one BT-M6Z02-RF (called “Main”)will centralize the information of the other BT-M6Z02-RF (called “Sub”).Refer to Centralized Installation of the user guide4 Pair in master mode the BT-M6Z02 RF (Zone 1) to the Central Unit BT-CT02 RF.Name the virtual rooms in the BT-CT02 RF and select the hydraulic circuit.5 OPTION - Pair the BT-WR02 HC RF (or BT-WR02 RF) receiver to theBT-CT02 RF as a hydraulic circuit then selects the hydraulic circuit.Devices configuration: go in the zone, select the information menu, select thereceiver and the hydraulic type, then the hydraulic circuit (refer to HYDRAULICSYSTEM PAIRING chapter on Central Unit user guide).BT-CT02 RFBT-D02 RFBT-D02 RFBT-WR02 HC RF15For a correct installation, refer to dedicated user guides of each product, then:WIRING CONNECTION:• Connect the actuators (eg. 22C – 22CX series) to the connecting box BT-M6Z02 RF• Connect the connecting box BT-M6Z02 RF (ZONE 1 ) to the heating relay of boileror• OPTION – if not possible (eg. the manifold is too far) connect a Receiver BT-WR02 HC RFto the heating relay of boilerVIRTUAL – RF CONNECTION:1-2 Pair each thermostat to each zone of the BT-M6Z02 RF.One thermostat can drive several zones.3 Pair the two BT-M6Z02: In this configuration, one BT-M6Z02-RF (called “Main”) willcentralize the information of the other BT-M6Z02-RF (called “Sub”).Refer to Centralized Installation of the user guide4 Pair in master mode the BT-M6Z02 RF (Zone 1) to the Central Unit BT-CT02 RF.Name the virtual rooms in the BT-CT02 RF and select the hydraulic circuit.5 OPTION - Pair the BT-WR02 HC RF (or RF BT-WR02 RF) receiver to the BT-CT02 RF as ahydraulic circuit then selects the hydraulic circuit. Devices configuration: go in the zone,select the information menu, select the receiver and the hydraulic type, then thehydraulic circuit (refer to HYDRAULIC SYSTEM PAIRING chapter on Central Unit userguide).- Option -Option1st floorGround floorUP TO SIXBT-M6Z02 RFBT-WR02 HC RFUP TO SIXBT-M6Z02 RF