Waves SSL 4000 E User Manual

Also see for SSL 4000 E: Specification sheet

Contents

Waves SSL 4000 E User Manual Manual pdf 9 page image

SSL E-Channel & G-Channel User Manual9Dynamics Section ControlsCompressor (white knobs) The compressor’s Ratio/Slope can be set from 1 to infinity (limiter). The Threshold is variably adjustable from +10 dB to -20 dB. When the Attack time switch is set to Slow (F.ATK off) attack time is auto-sensing andprogram dependent. Fast setting (F.ATK) attack time is 1 ms. Release time is adjustable from 0.1 to 4 seconds.Expander/Gate (green knobs) The expander’s Threshold is variable from -30 dB to +10 dB. Range is variable from 0 – 40 dB. When the Attack time switch is set to Slow (F.ATK off) attack time is auto-sensing andprogram dependent. Fast setting (F.ATK) attack time is 1 ms. Release time is adjustable from 0.1 sec to 4 seconds. The Gate switch toggles the section from an expander (default mode) into a gate.Dyn To Bypass bypasses the entire dynamics section. Note that selecting Bypass does not result in aflat signal, but rather one which mimics the flat response of the SSL channel strip hardware. Ch Out moves the dynamics to the output of the E-Channel, making it post-EQ.