Waveshare SIM7000E User Manual
                  | |
SIM7000E NB-IoT HAT User Manual14Rev1.0 June 8, 2018share awesome hardware5. Using with Raspberry Pi5.1. Interface overviewThe default relationship between SIM7000 control pins and Raspberry Pi IOs is shown in Table 1.Table 1: The relationship between SIM7000 control pins and Raspberry Pi IOsSIM7000 IO of Raspberry Pi B+ Description5V 5V Power supply (5V)GND GND GroundTXD P15 / RXD UART pinRXD P14 / TXD UART pinPWR P4 (Need to modify the back solder joint) Power up the module5.2. UART configuration of Raspberry PiBecause UART of Raspberry Pi is used for Linux console output by default, if we want to use the UART,we need to change the settings. Executing this command to enter the configuration page ：sudo raspi-config |
Related manuals for Waveshare SIM7000E
Waveshare 10451 User Manual
Waveshare UART TO ETH User Manual
Waveshare RS485 TO ETH User Manual
Waveshare WIFI-LPT100-B User Manual
Waveshare UART GPS NEO-6M User Manual
Waveshare Motor Driver HAT User Manual
Waveshare Barcode Scanner Module User Manual
Waveshare 4.2inch e-Paper Module User Manual
Waveshare SIM7600CE-T Quick Start Manual
Waveshare ESP32-S3-LCD-Driver-Board User Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine