Wood Stone BISTRO 3030 Installation And Operation Manual

Also see for BISTRO 3030: Installation and operation manual Installation and operation manual Installation and operation manual Installation and operation manual Installation and operation manual

Bistro Line Installationand Operation ManualPG 9 OF 40M0025�14 SEPTEMBER 2017An ongoing program of product improvement mayrequire us to change specifications without notice.WOOD STONE CORPORATION1801 W. Bakerview Rd.Bellingham, WA 98226 USATOLL FREE 800.988.8103TEL 360.650.1111FAX 360.650.1166E-MAIL info@woodstone-corp.comwoodstone-corp.comBL-4836 SPECIFICATIONSActual weight: 1,650 lbs.Shipping weight: 1,850 lbs.UTILITIES SPECIFICATIONSGas3/4 inch FNPT gas inlet80,500 BTU/hr Natural Gas (NG)OR80,500 BTU/hr Propane (LP)Maximum gas inlet pressure:1/2 psi (14 inches W�C�)Electrical120 VAC, 2 A, 60 HzOptional: 240 VAC, 1 A, 60 HzAll utility connections made at theback of the oven� Remove frontpanel for access�Refer to data plate when installing�Plan viewSide view Rear viewFront viewVentingThe Bistro has a 10-inch O�D� flue collar� It can be directconnected to a power-ventilated, grease-rated chimney, orcan be vented with a Listed Type 1 exhaust hood, or oneconstructed in accordance with NFPA 96 and all relevant localand national codes� The oven must be vented in accordancewith all relevant local and national codes, and in a manneracceptable to the authority have jurisdiction�Knockouts providedon rearfor gas/electricalAir intake: Do notfacade or cover overMust be leftremovable for service30"762mmNOTE: The rear panel mustbe installed for the oven towork properly�REV:LEGEND:PART #: 001-5048364836 Bistro - Main StationGeneral Arrangement8/29/2013 bena ADWN BY:SHEET:Bellingham, WA 360/650-1111 www.woodstone-corp.comDIMENSIONS ARE IN INCHESTOLERANCES: LINEAR ±1/2 [±10mm], ANGULAR ±2°UNLESS NOTED OTHERWISE\\woodstone.net\dfs\CAD\0 Pn\WS Top Level\WS-BL-4836_General_Arrangement-0.dftTHE INFORMATION CONTAINED IN THIS DRAWING IS THESOLE PROPERTY OF WOOD STONE CORPORATIONANY REPRODUCTION OR USE IN PART OR AS A WHOLEWITHOUT THE WRITTEN PERMISSION OF WOOD STONE ISPROHIBITEDAN ONGOING PROGRAM OF PRODUCT IMPROVEMENTMAY REQUIRE US TO CHANGE SPECIFICATIONSWITHOUT NOTICE.DATE:G120VAC, 2AGAS INLET: 3/4" NPT80,500 BTU, NG68,000 BTU, LP1 of 1AIR INTAKEG 42 3/4"1090mm7 1/2"190mm10"250mm OD71 1/2"1810mm9 3/4"250mm24 1/2"620mm6"150mm47 1/4"1200mm36 3/4"940mm70"1780mm40"1020mm47 1/4"1200mm1 1/2"40mm10 1/2"270mm7 3/4"200mm9 1/4"230mm6 1/4"160mm 6 1/4"160mm35 1/4"900mmREV:LEGEND:PART #: 001-5048364836 Bistro - Main StationGeneral Arrangement8/29/2013 bena ADWN BY:SHEET:0/650-1111 www.woodstone-corp.comMENSIONS ARE IN INCHESS: LINEAR ±1/2 [±10mm], ANGULAR ±2°LESS NOTED OTHERWISE\0 Pn\WS Top Level\WS-BL-4836_General_Arrangement-0.dftION CONTAINED IN THIS DRAWING IS THERTY OF WOOD STONE CORPORATIONCTION OR USE IN PART OR AS A WHOLERITTEN PERMISSION OF WOOD STONE ISPROHIBITEDPROGRAM OF PRODUCT IMPROVEMENTIRE US TO CHANGE SPECIFICATIONSWITHOUT NOTICE.DATE:G120VAC, 2AGAS INLET: 3/4" NPT80,500 BTU, NG68,000 BTU, LP1 of 1AIR INTAKEG 42 3/4"1090mm7 1/2"190mm10"250mm OD1/2"10mm9 3/4"250mm24 1/2"620mm6"150mm47 1/4"1200mm36 3/4"940mm70"1780mm40"1020mm47 1/4"1200mm1 1/2"40mm10 1/2"270mm7 3/4"200mm9 1/4"230mm6 1/4"160mm 6 1/4"160mm35 1/4"900mmAIR INTAKEG 42 3/4"1090mm7 1/2"190mm10"250mm OD71 1/2"1810mm9 3/4"250mm24 1/2"620mm6"150mm47 1/4"1200mm36 3/4"940mm70"1780mm40"1020mm47 1/4"1200mm1 1/2"40mm10 1/2"270mm7 3/4"200mm9 1/4"230mm6 1/4"160mm 6 1/4"160mm35 1/4"900mmREV:LEGEND:PART #: 001-5048364836 Bistro - Main StationGeneral Arrangement8/29/2013 bena ADWN BY:SHEET:Bellingham, WA 360/650-1111 www.woodstone-corp.comDIMENSIONS ARE IN INCHESTOLERANCES: LINEAR ±1/2 [±10mm], ANGULAR ±2°UNLESS NOTED OTHERWISE\\woodstone.net\dfs\CAD\0 Pn\WS Top Level\WS-BL-4836_General_Arrangement-0.dftTHE INFORMATION CONTAINED IN THIS DRAWING IS THESOLE PROPERTY OF WOOD STONE CORPORATIONANY REPRODUCTION OR USE IN PART OR AS A WHOLEWITHOUT THE WRITTEN PERMISSION OF WOOD STONE ISPROHIBITEDAN ONGOING PROGRAM OF PRODUCT IMPROVEMENTMAY REQUIRE US TO CHANGE SPECIFICATIONSWITHOUT NOTICE.DATE:G120VAC, 2AGAS INLET: 3/4" NPT80,500 BTU, NG68,000 BTU, LP1 of 1AIR INTAKEG 42 3/4"1090mm7 1/2"190mm10"250mm OD71 1/2"1810mm9 3/4"250mm24 1/2"620mm6"150mm47 1/4"1200mm36 3/4"940mm70"1780mm40"1020mm47 1/4"1200mm1 1/2"40mm10 1/2"270mm7 3/4"200mm9 1/4"230mm6 1/4"160mm 6 1/4"160mm35 1/4"900mm47 3/4"1213mm47 1/4"1213mm