Wood Stone FIRE DECK Series Installation And Operation Manual

Also see for FIRE DECK 6045: Service manual Service manual Installation and operation manual Installation and operation manual

FD-6045-CE and FD-8645-CEFire Deck Installation and Operation ManualPG 6 OF 32M0042�13 JULY 2019FD-8645-CE SPECIFICATIONSShipping weight:1975 Kg (4350 lbs.)Air intake: Do notfacade or cover overMust be leftremovable for servicePlan viewFront viewSide viewNOTESThis oven is availablein a left, right or leftand right side burnerconfigurations� The utilityconnections will alwaysbe on the left side�NOTE: Using thetemporary optionalcasters will add 76 mm(3") to the height of theoven, for a total heightof 2070 mm (81-1/2")�However, the 100 mm(3-3/4") vent shield ontop can be removedtemporarily if necessary�REV:PART #: FD-8645-RFG-L/R-IR8645 Fire Deck5/10/2018 lucasm 3DWN BY:SHEET:ingham, WA 360/650-1111 www.woodstone-corp.comDIMENSIONS ARE IN INCHESOLERANCES: LINEAR ±1/2 [±10mm], ANGULAR ±2°DATE:1 of 1AIR INTAKEGG33 3/4"860mm40 1/2"1030mm48"1220mm29 3/4"760mm3"80mm17"430mm 9 3/4"250mm3 1/4"80mm43"1090mmR 12"300mmCleaning PositionSwing Radius85 3/4"2180mm45"1150mm5"130mm59 3/4"1520mm 7 1/2"190mm52 1/2"1330mm6"150mm1"30mm13 1/4"340mm17 3/4"450mm2"50mm55 3/4"1420mm74 1/4"1890mm9 3/4"250mm 14"360mm23 3/4"600mm24 3/4"630mm25 1/2"650mm77 1/2"1970mm10 1/4"260mm4"100mm10"250mmREV:PART #: FD-8645-RFG-L/R-IR8645 Fire Deck5/10/2018 lucasm 3DWN BY:SHEET:ham, WA 360/650-1111 www.woodstone-corp.comDIMENSIONS ARE IN INCHESERANCES: LINEAR ±1/2 [±10mm], ANGULAR ±2°DATE:1 of 1AIR INTAKEGG33 3/4"860mm40 1/2"1030mm48"1220mm29 3/4"760mm3"80mm17"430mm 9 3/4"250mm3 1/4"80mm43"1090mmR 12"300mmCleaning PositionSwing Radius85 3/4"2180mm45"1150mm5"130mm59 3/4"1520mm 7 1/2"190mm52 1/2"1330mm6"150mm1"30mm13 1/4"340mm17 3/4"450mm2"50mm55 3/4"1420mm74 1/4"1890mm9 3/4"250mm 14"360mm23 3/4"600mm24 3/4"630mm25 1/2"650mm77 1/2"1970mm10 1/4"260mm4"100mm10"250mmREV:LEGEND:PART #: FD-8645-RFG-L/R-IR8645 Fire DeckGeneral Arrangement5/10/2018 lucasm 3DWN BY:SHEET:ingham, WA 360/650-1111 www.woodstone-corp.comDIMENSIONS ARE IN INCHESOLERANCES: LINEAR ±1/2 [±10mm], ANGULAR ±2°UNLESS NOTED OTHERWISEE INFORMATION CONTAINED IN THIS DRAWING IS THEN ONGOING PROGRAM OF PRODUCT IMPROVEMENTMAY REQUIRE US TO CHANGE SPECIFICATIONSWITHOUT NOTICE.DATE:120VAC, 1.1A, 50/60 Hz1 of 1AIR INTAKEGG33 3/4"860mm40 1/2"1030mm48"1220mm29 3/4"760mm3"80mm17"430mm 9 3/4"250mm3 1/4"80mm43"1090mmR 12"300mmCleaning PositionSwing Radius85 3/4"2180mm45"1150mm5"130mm59 3/4"1520mm 7 1/2"190mm52 1/2"1330mm6"150mm1"30mm13 1/4"340mm17 3/4"450mm2"50mm55 3/4"1420mm74 1/4"1890mm9 3/4"250mm 14"360mm23 3/4"600mm24 3/4"630mm25 1/2"650mm77 1/2"1970mm10 1/4"260mm4"100mm10"250mmExhaustUTILITIES SPECIFICATIONSGas19mm (3/4") FBSPT femalethreaded gas inletSee Gas Specifications onpages 15 of this manual.Maximum gas inlet pressure:34 mbar(1/2 psi or 14" W�C�)Electrical230 VAC, 2 A, 50 HzAll utility connections made beneathoven as shown�Refer to data plate when installing�VentingThe oven has been approved as a Type A appliance and may bevented using an approved exhaust hood� All exhaust system ventingshould meet the construction requirements of a grease duct� Theoven must be vented in accordance with all relevant local andnational codes, and in a manner acceptable to the authority havejurisdiction� See Venting section for further details�Important: “-W” models must be vented as solid-fuel oven�