X7968r / X7967r / X7927r / X7922r User’s Guide26Configuring the WAN IP Settings if BridgingFigure 26: Configuring WAN IP SettingsIn this mode, the device is a bridge and passes all raw data traffic between WAN and LANports. There is no need for any settings.Click Next.The same procedure as configuring PPPoA or PPPoE, the configuring the LAN site settingsand confirming setting pages will be shown, please follow up above descriptions to finishthe settings. But be noted, the IP addresses in the PC of LAN side are visible to the WAN sitein the bridging mode, those IP addresses are not blocked by NAT feature.
