- 8 -Mounting and connecting tipsMounting options Normally 95.44/95.24/95.22 is placed near a wall.The wall behind affects the reproduction of thespeaker and characteristics. Please take your timeto try out the best placement.95.33 is normally placed below the movie screen orTV. This effect the sound in the same way as above.Spikes The XTZ 95.44 is equipped with rubber feet,intended for vibration-muffling, making the use ofspikes unnecessary.95.33/95.24/95.22 have no rubber feetCorrect phase whenconnectingAlways make sure the speaker is connected inrespect of the correct phase. The + terminal of theamplifier should be connected to the + terminal ofthe speaker.If the speaker is incorrectly connected tothe amplifier, there is no risk of damage ordanger. However, the sound will not bereproduced correctly.Overloading After playing at a very high sound level for aprolonged period of time there is a risk ofdamaging the speakers and/or the amplifier.Initial use of yourspeakersThe drivers of a loadspeaker require about 50 to100 hours of use before the full quality level isreached. During this time the speaker can be usednormally.