7.5.3 Buzzer output setup Configure Buzzer output when event triggered. Operation: Configure Enable/Disable of the Buzzer. Health check: Select “ON”, when Elite NVR system Event is triggered, relay output will be activated. (Booting / Fan Error / HDD Error…) Mode: Configure operation mode of Buzzer output.• Transparent: Keep buzzer output until event operation is stopped.• Latched: Keep buzzer output as long as duration specified. Duration: Configure duration for buzzer output at latched mode. Sensor: When sensor input, buzzer output will be activated. Video loss: When video loss occurred, buzzer output will be activated. Motion: When motion triggered, buzzer output will be activated.47
