XVision Elite 9004P User Manual
                                                                                                                  | |
Contents
| 
NVR port: The port number that the Elite NVR uses to support to the remote software. Web server port: The port number that the Elite NVR uses to support remote connection fromInternet Explorer or other web browsers. Max TX speed: Specifies the maximum bandwidth that the Elite NVR can use during a remoteconnection.Both NVR and web server port will need a firewall rule creating for remoteConnectionUPNP (Auto Port Forwarding) is activated always background.UPNP function for automatic forwarding is not supported on all routers, pleasecheck your router. Network stream: If sub stream is used, sub steam can be transmitted to network. If it doesn’thave sub stream, main stream is transmitted. Port type: Select Elite NVR’s web server port /NVR port as an Ethernet or local port.• Ethernet: Web server port and NVR port is used in Ethernet port.• Local: Web server port / NVR port is used in local port.7.8.2 Local portIn auto mode, Elite NVR will assign IP address based on local port setting toIPC automatically.In Manual/RTSP mode, you need to assign same segment of IP address to theIPC manually. IP address: Set IP address for Local port. Default value is 192.168.172.100 Gateway: Set Gateway for Local port. Subnet mask: N/A grayed out58 |
Related manuals for XVision Elite 9004P
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine