XVision X720D User Manual

Contents

XVision X720D User Manual Manual pdf 6 page image

11 General Introduction1.1 OverviewThis series IP camera integrates the traditional camera and network video technology. It adopts audioand video data collection, transmission together. It can connect to the network directly without anyauxiliary device.This series IPC uses standard H.264 video compression technology and MJPEG audio compressiontechnology, which maximally guarantee the audio and video quality.This series IPC enclosure has the strong resistance capacity, which can guarantee the proper workperformance under heavy strike. It supports real-time monitor and motion detect function.It can be used alone or used in a network area. When it is used lonely, you can connect it to thenetwork and then use a network client-end. Due to its multiple functions and various uses, this seriesIPC is widely used in many environments such office, bank, road monitor and etc.1.2 FeaturesUserManagement Different user rights for each group, one user belongs to one group. The user right shall not exceed the group right.StorageFunction Support central server backup function in accordance with your configurationand setup in schedule setting Support record via Web and the recorded file are storage in the client-endPC. Support built-in Micro SD card. Support short-time storage when encounterdisconnection. (For some series only.) Support network storage such as FTP.AlarmFunction Real-time respond to video detect as user pre-defined activation setup andexert corresponding message in screen and audio prompt(allow user to pre-record audio file) Real-time video detect: motion detect, camera masking. Can generate an alarm when network abnormal, SD card abnormal eventoccurred.NetworkMonitor IPC supports one-channel video data transmit to network terminal and thendecode. Delay is within 270ms (network bandwidth support needed) Max supports 20 connections. Adopt the following audio and video transmission protocol: HTTP, TCP, UDP,RTP/RTCP, RTSP and etc. Support web access, widely used in WAN.NetworkManagement Realize IPC configuration and management via Ethernet. Support device management via web or client-end. Support various network protocols.Power  External power adapter DC12V Support PoE.AssistantFunction Log function Support PAL/NTSC Support system resource information and running status real-time display. Day/Night mode auto switch. Backlight compensation: screen auto split to realize backlight compensationto adjust the bright. Support electronic shutter and gain setup.