XVision XP5000T User Manual
                                        | |
23 Use the screwdriver to loosen the 3G card protection cap screw in the side panel, and thenremove the 3G card protection cap from the camera. Install the 3G card to the camera according to the proper installation position. Put the 3G card protection cap back. Use the screwdriver to fix the 3G card protection cap screw firmly to secure the 3G cardprotection cap.Figure 3-7Figure 3-83.3.2 RemovePlease follow the steps listed below to remove 3G card. The interface is shown as Figure 3-9. Use the screwdriver to loosen the screw of 3G card protection cap in the rear panel.Remove the cap from the camera. Follow the 3G card direction to remove the 3G card. Insert the 3G card protection cap. Use the screwdriver to fix the screw to secure the protection cap.Figure 3-9 |
Related manuals for XVision XP5000T
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine