XVision XP5000T User Manual

Contents

XVision XP5000T User Manual Manual pdf 36 page image

305 Web OperationThis series IPC product support the Web access and management via PC.Web includes several modules: monitor channel preview, PTZ control, system configuration,alarm and etc.5.1 Network ConnectionPlease follow the steps listed below for network connection. Make sure the IPC has connected to the network properly. Please set the IP address, subnet mask and gateway of the PC and the IPC respectively.IPC default IP address is 192.168.1.108. Subnet mask is 255.255.255.0. Gateway is192.168.1.1. Use order ping ***.***.***.***(* IP camera address) to check connection is OK or not.5.2 Login and LogoutOpen IE and input IP camera address in the address bar.For example, if your camera IP is 192.168.1.108, then please input http:// 192.168.1.108 in IEaddress bar. See Figure 5-1.Figure 5-1The login interface is shown as below. See Figure 5-2.Please input your user name and password.Default factory name is admin and password is admin.Note: For security reasons, please modify your password after you first login.Input your IPaddress here