Xante ColourLaser 21 Series Setup Manual

Contents

2116 USB Install: Macintosh (cont.)Activate the Duplex Unit andInternal Hard Drive in thePrinter DriverIf you have the XANTÉ ColourLaser 21D or the XANTÉColourLaser 21HC, you must activate the duplex unit andhard disk drive in the drivers before using them.! These procedures are also used when installingoptional memory SIMMs, auxiliary paper trays andHigh Capacity Feeder. See “Accessories” in theon-line XANTÉ ColourLaser 21 Series User’s Guide.1. Activate Chooser from the Apple menu.2. Select LaserWriter 8.3. Click Printer ® Setup.4. Click Configure.5. Change the Duplex setting to Installed.6. Change the Hard Disk setting to Installed.7. Click OK twice.8. Close Chooser.USB: On-Line ManualsRequirements• Microsoft Internet Explorer version 5.0 or higherTo Load the Manuals! In order to open the on-line manuals, you must haveyour Macintosh set to run .htm extension files underyour browser.Create folders in which to store the XANTÉColourLaser 21 Series User’s Guide and the NetworkUser’s Guide.Place the CD supplied with your printer in yourCD-ROM drive.Copy the files from the CD folderManuals\UserGuid\Html\English to the folder youcreated for the XANTÉ ColourLaser 21 Series User’sGuide.Copy the files from the CD folderManuals\Network\Html\English to the folder youcreated for the Network Print Server User’s Guide.! For the latest information, double-click theReadmeMac.htm file in the Readme folder on the CDsupplied with your printer.To View the ManualsTo view the on-line manuals, go to the folder where youstored the manual, then double-click the start_e.htm file.