Xerox 3812 User Manual

Also see for 6100BD - Phaser Color Laser Printer: System guide Installation guide Specifications User guide Brochure & specs

Installation and setupDefining a logical printerBefore using DocuSP IPDS to process IPDS data streams, the hostmust have a logical printer defined for DocuSP IPDS with thefollowing requirements:• For TCP/IP connectivity, the Internet Protocol (IP) address and portnumber of the logical printer must match the IP address and portnumber of the printer. Valid values are 5001 through 65535.• For channel connectivity, the unit address specified for the hostprinter definition must be a unique value and must match the unitaddress specified on the DocuSP IPS Manager.• For MVS, the logical printer must be defined as an AFP-type device.TCP/IP and channel connectivity can be established in the IPSManager System pull-down menu, System Configuration dialog box.Verifying the installationThe following steps should be completed for a successful installationof the DocuSP IPDS software, and proper queue and printer setup:• Ensure that the IPDS Interpreter license file has been loaded, andthat IPDS is active and enabled in the DocuSP Feature Manager.• Install the IPS Manager software. The Xerox Service Representativeperforms this task.• Ensure a streaming print queue is defined on the DocuSP for yoursystem. You can view this queue by using the DocuSP QueueManager. This print queue initially has an Accept value of Yes and aRelease value of Yes.• Ensure that no overrides are set on the queue for any of theproperties defined earlier in this section.To verify that the installation and initial setup are successful, printboth a host job and either the US Letter or the A4 sample job. If bothprint successfully, installation verification is complete.In addition, if you installed the IBM AFP resident outline fonts, printthe scfont.trc sample job to verify that the fonts were loaded correctly.Xerox DocuSP IPDS User Guide 2-7