Xerox 4050 Installation Planning Manual

Also see for 4050: Message guide Forms creation guide Code List Message guide Quick reference card

Contents

Xerox 4050 Installation Planning Manual Manual pdf 60 page image

PRINTER SPECIFICATIONS AND REQUIREMENTS6-10 XEROX DOCUPRINT 4050/4090 IPS INSTALLATION PLANNING GUIDESpace planning guidelinesWhen determining your space requirements and planning for sharedspace between your DocuPrint printers, it is important to consider allof the components you plan to install.To ensure all of the space requirements are met, it is important towork with your Xerox representative.Before installation, you must consider the following:• Clearance space requirements where you intend to install theprinting system• Delivery access requirements• Recommended cable lengths and locations (refer to the“System connections” chapter of this guide for moreinformation)• Floor leveling.Clearance space requirementsThe printer must be installed in a fixed location that provides thefollowing clearance space:• 36 inches / 91.4 cm on all sides of each component• 78 inches / 198 cm of vertical clearance throughout the entirearea• 24 inches / 61 cm of exclusive operator area in front of eachcomponent.Shared spaceIt is best to provide the full amount of clearance space around thehardware components. Your environment may require you to useshared space between components, such as between the printer andanother Xerox printing system. You can share the 36-inch / 91.4 cmclearance space around each component, as long as you followthese rules:• Space may be shared only with other Xerox equipment.• Components may share the 36-inch / 91.4 cm general serviceclearance areas, but they may not share the 24-inch / 61 cmoperator area in front of each component.• There must be 78 inches / 198 cm of vertical clearancethroughout the entire area.Note: Finishers attached to your bypass transport may occupyshared space with Xerox equipment. However, they must beremovable to allow servicing of the DocuPrint NPS printer stackers.Consult with your Xerox representatives to ensure all therequirements are met.