Xerox 4050 Installation Planning Manual

Also see for 4050: Message guide Forms creation guide Code List Message guide Quick reference card

Contents

Xerox 4050 Installation Planning Manual Manual pdf 80 page image

INSTALLATION8-2 XEROX DOCUPRINT 4050/4090 IPS INSTALLATION PLANNING GUIDEYour responsibilitiesXerox is responsible for the physical installation of the printercomponents and for loading the software and applications. You havethe general site responsibility of ensuring that the right personnel andsupplies are available.At the time of installation, you should do the following:• Make sure that your system administrator is available during theloading of software.• If you plan to operate in Dual Mode, for software loadingpurposes, be prepared to provide Xerox personnel with anynetwork information.• Have test jobs ready to run.• Have the necessary parameters defined to configure PSF forconnectivity to your IPS printer.• Have list of stocks you want used for your default input trayconfiguration.• Have your operators available for training.• Sysgen your host to print to an AFP1-type printer. Refer to theIBM ITSC Distributing AFP Printing from a Host System(#GG24-4493) documentation for further information.• If your system will be channel-attached, make available a busand tag connection from the host system as follows:— AS/400 requires a Barr/AFD or PS/2 with a channel card.— RS/6000 requires a channel card for IPS connectivity.— PS/2 requires a channel card for IPS connectivity.• Make AFP application resources available at a resolution of 300dpi to optimize output quality.• Check the documentation and software kits against theirpacking lists for completeness.• Remember you are responsible for supplying, installing, andmaintaining your Token Ring or Ethernet Local Area networkthat connects your host with your printer controller.Refer to the installation planning checklist in the “Preparing forinstallation” chapter of this guide for a complete list of responsibilities.