SetupsXerox 4112/4127 Copier/Printer 9-113System Administration GuideCopy ControlThe options here allow you to select the default settings that relate to the copy operation, suchas Auto Paper, Original Type, Output Orientation, and many more. To select the defaultsettings for the various Copy Control options, perform the following steps:1. From the Copy Service Settings screen, select Copy Control.2. Select a Copy Control item to be set or changed, and select Change Settings.NoteSelect s to display the previous screen and select t to display the next screen.NoteEach of the items shown in the above illustration is discussed on the following pages.3. Select the desired setting for that item.4. Select Save; you are returned to the Copy Control screen.5. Repeat Steps 1-4 until you have selected the desired setting for each Copy Control item.6. Select Close to return to the Copy Service Settings screen.Memory Full ProcedureWhile scanning/copying an original, if there is insufficient space on the machine’s hard disk, ascreen appears. This screen asks the user how to handle the partially stored data. If the userdoes not respond to this screen and a predetermined amount of time elapses, then the machinewill either cancel the job or run the partially scanned-in/copied job. The setting selected heredetermines how the machine will handle that partially scanned-in/copied job.• Delete Job: The stored data is deleted from the machine’s hard disk.• Run Job: The scanned-in/copied data is treated as valid and complete, and the job printedas is.NoteYou can set amount of time that elapses between an error occurring and the machine’shandling of the partially scanned-in/copied job. For more information, refer to Auto Job Releaseon page 9-10.Maximum Stored PagesSet the default maximum number of pages stored for a copy original. You can set a numberbetween 1-2000 pages.Downloaded From ManualsPrinter.com Manuals
