DocuPrint NPS/IPS on a Novell networkD-11 Installation Planning GuideConfiguring DocuPrint as an RPRINTERThe following is a summary of the tasks to perform if youconfigure the DocuPrint NPS/IPS as an RPRINTER:1. Perform the following Novell tasks:a. Sign on to the Novell workstation as a networkadministrator.b. From PCONSOLE, create a Printer Queue (for example,Gazette) and a Print Server (for example, PGazette).c. From the Print Server window, configure a printer forPSERVER using the Printer Configuration option.d. Enter any name (for example, Gazette) for the printer.Select Remote Other/Unknown type for the printer andsave the information.e. Define the printer in the Queue Service by highlighting theprinter name (for example, Gazette) and pressing Enter.f. Press the Insert key to select the Print Queue (forexample, Gazette) you want to bind with PSERVER (forexample, PGazette).g. Save the information.2. When configuring NPS/IPS, answer the configurationquestions as follows:• Remote Printer for Novell Netware -- • Use Print Server for Novell Netware -- • Name of Novell Print Server -- PGazette• IPX Internal Network Number [000000##] (assigned bynetwork administrator)• IPX number of Connected LAN [000000##] (assigned bynetwork administrator)• Token Ring Framing type -- TOKENRING (orTOKENRING_SNAP)3. After installation, change from PSERVER to RPRINTER asfollows:a. Sign on to privilege as an administrator.b. Enter Configure to specify the printer configuration.c. Select Option 3, enter to the Review AllInformation question, and type Novell to review Novellinformation.
