Xerox 6000V_B User Manual

Contents

Xerox 6000V_B User Manual Manual pdf 10 page image

SafetyPhaser 6000/6010 Color PrinterUser Guide10Operational SafetyYour printer and supplies were designed and tested to meet strict safety requirements. These includesafety agency examination, approval, and compliance with established environmental standards. Yourattention to the following safety guidelines helps to ensure the continued, safe operation of yourprinter.Operational Guidelines• Do not remove the paper from the tray when the printer is printing.• Do not open the doors when the printer is printing.• Do not move the printer when it is printing.• Keep hands, hair, neckties, and such, away from the exit and feed rollers.• Covers, which require tools for removal, protect the hazard areas within the printer. Do not removethe protective covers.• Do not use conductive paper such as origami paper, carbonic paper, or conductively coated paper.Ozone ReleaseThis printer produces ozone during normal operation. The amount of ozone produced is dependent onthe volume of printing. Ozone is heavier than air and is not produced in amounts large enough to harmanyone. Install the printer in a well-ventilated room.For more information in the United States and Canada, go to:• Phaser 6000 printer: www.xerox.com/environment• Phaser 6010 printer: www.xerox.com/environmentIn Europe, go to:• Phaser 6000 printer: www.xerox.com/environment_europe• Phaser 6010 printer: www.xerox.com/environment_europePrinter Location• Do not block or cover the slots or openings on the printer. These openings are provided forventilation and to prevent overheating of the printer.• Place the printer in a dust-free area where there is adequate space for operation and servicing. Fordetails, see the Installation Guide.• Do not store or operate the printer in extreme conditions of heat or humidity. For specifications onoptimum performance environment, see Clearance Requirements on page 65.• Place the printer on a level, solid, non-vibrating surface with adequate strength to hold the weightof the printer. The base printer weight without any packaging materials is approximately 10.7 Kg(23.6 lb.).• Do not place the printer near a heat source.• Do not place the printer in direct sunlight to avoid exposure to light-sensitive components.