MaintenancePhaser 6000/6010 Color PrinterUser Guide19Replacing a Toner CartridgeThe printer has four toner cartridges: cyan (C), magenta (M), yellow (Y), and black (B).Phaser 6010 Printer Toner Cartridge Error MessageWhen a toner cartridge is nearly empty, a message appears on the control panel display screen:Note: If the printer displays a toner cartridge error message with the original toner cartridges stillinstalled, the printer needs to be reset. First, ensure that all of the toner cartridges are seatedproperly. Turn the printer off, then on again. If the error message persists after cycling the printerpower, install a new toner cartridge.Make sure that you have an adequate toner supply to prevent printing interruptions. For details, seeWhen to Order Supplies on page 22Phaser 6000 Printer Toner Cartridge Error MessageWhen a toner cartridge needs replacing, the indicators on the control panel show which toner cartridgeneeds attention. The error indicator lights illuminate to show a fault. A toner indicator light (C, M, Y, orK) flashes to indicate which toner to replace.Note: If the control panel lights indicate a toner cartridge error with the original toner cartridgesstill installed, the printer needs to be reset. First, ensure that all of the toner cartridges are seatedproperly. Turn the printer off, then on again. If the error indicator persists after cycling the printerpower, install a new toner cartridge.Make sure that you have an adequate toner supply to prevent printing interruptions. For details, seeWhen to Order Supplies on page 22Replacing a Toner Cartridge.1. Spread some paper at the right side of the printer to catch loose toner.Message ActionReplace XXXX Cartridge The toner cartridge is empty. Replace it with a new toner cartridge.