Xerox 6100BD - Phaser Color Laser Printer Getting Started Manual

Also see for 6100BD - Phaser Color Laser Printer: System guide Installation guide Specifications User guide Brochure & specs

Xerox 6100BD - Phaser Color Laser Printer Getting Started Manual Manual pdf 31 page image

DOCUSP 4.1Nuvera Stacker/Finisher ScriptFor the Nuvera family of printers, you must use the followingscript to set up Stackers and/or Finishers:1. Open a terminal window.2. Login as root.3. Type cd /opt/XRXnps/bin/DFA_IsStacker.4. Press .5. Type ./set –f 0 OR ./set –f 1. Use the value 0 if theattached DFA device is a finisher, or use the value of 1 ifthe attached DFA device is a stacker. Note that there arespaces before and after the –f switch.6. Restart DocuSP.NOTE: This setting is lost on an upgrade or a scrapeinstall and must be recreated using this procedure.LPR gateway behavior for document titlePrior to DocuSP 4.0, the controller applied the LPR gatewayfilename to submitted documents as opposed to the internallyset document name. Starting with DocuSP 4.0, the controllerapplies the internal document name to the job.To set the DocuSP to the pre-4.0 behavior, run the followingscript:1. Open a terminal window.2. Login as root.3. Type enablePre40LPRBehavior4. Press .5. To disable the pre-4.0 LPR behavior, typedisablePre40LPRBehavior6. Restart DocuSP.NOTE: A document name set in the job ticket has a higherprecedence than the LPR gateway and internal documentattributes.XEROX DOCUMENT SERVICES PLATFORM SERIES 27GETTING STARTED