Before Using the MachineXerox 6204 Wide Format SolutionUser Guide1-8Safety NotesRead these Safety Notes carefully before using this product to ensure that you operate the equipmentsafely.Your Xerox product and recommended supplies have been designed and tested to meet strict safetyrequirements. These include safety agency approval, and compliance to established environmentalstandards. Please read the following instructions carefully before operating the product, and refer to themas needed to ensure the continued safe operation of your product.The safety and environment testing and performance of this product have been verified using Xeroxmaterials only.WARNING: Any unauthorized alteration, which may include the addition of new functions orconnection of external devices, may impact the product certification. Please contact your AuthorizedLocal Dealer for more information.Warning MarkingsAll warning instructions marked on or supplied with the product should be followed.WARNINGS:• This warning alerts users to areas of the product where there is the possibility of personal injury.• This warning alerts users to areas of the product where there are heated surfaces, which should not betouched.Electrical SupplyThis product shall be operated from the type of electrical supply indicated on the product’s data platelabel. If you are not sure that your electrical supply meets the requirements, please consult your localpower company for advice.WARNING: This product must be connected to a protective grounded circuit.This product is supplied with a plug that has a protective grounding pin. This plug will only fit into agrounded electrical outlet. This is a safety feature. To avoid risk of electric shock, contact your electrician toreplace the electrical outlet if you are unable to insert the plug into the outlet. Never use a groundingadapter plug to connect the product to an electrical outlet that lacks a grounded connection terminal.Operator Accessible AreasThis equipment has been designed to restrict operator access to safe areas only. Operator access tohazardous areas is restricted with covers or guards, which require a tool to remove. Never remove thesecovers or guards.
