CopyXerox 6204 Wide Format SolutionUser Guide3-61Step 3 - Scanning the OriginalFollow the procedure below to scan the original.Notes• A document jam may occur if you pull or press down too hard on an original while itscans.• To prevent document jams when copying originals that contain holes, orient the originalso that the holes feed in last.1. Orient the original face down, with one edge aligned with the original guide, and then evenlyinsert the lead edge into the scanner. When the scanner detects the original, it will feed it a shortdistance and stop briefly, then complete the scan automatically.Notes• Hold the original down flat with two hands (one on either side of the arrow shown in thegraphic) while it feeds into the starting position. Doing this helps prevent wrinkles thatmay result in dark areas on the copy. The document may jam if you release it before itstops feeding.• If the document does not feed automatically, the Scan Start mode may be set to[Manual Start]. In this case, press the button. For more information, refer to thesection on Scan Start.• The original guide can be moved to the right to scan an oversized original, or an originalwith hanging holes.• If a problem occurs during scanning, an error message will appear on the touch screen.Solve the problem as instructed in the message.2. If the scanner is equipped with front return guides, the original will exit toward the front of themachine. You may wish to guide the lead edge of the original as it travels toward you.
