MacintoshPhaser® 6250 Color Laser Printer3-363. Select Add Printer, then select AppleTalk from the pull-down list.4. Select the appropriate zone.5. Select your printer from the list provided.6. Select the appropriate PPD from the list in the Printer Model drop-down list. If yourprinter’s PPD is not listed, install it from the Printer Installer and Utilities CD-ROM.7. Click Add to complete the configuration.Quick Install Steps for Mac OS X, Version 10.2 (Rendezvous)RequirementsVerify that you are running Mac OS X, version 10.2 or later. Also ensure that you have run theinstaller from the Printer Installer and Utilities CD-ROM to install the proper printer driversfor your printer.1. Open the Print Center Utility (located in Utilities in the Applications Directory).2. Click Add.A list appears displaying your printer’s name, followed by a series of numbers. Forexample, Your Printer’s Name xx:xx:xx. Each numbered segment represents the lastsection of your printer’s hardware address. Your PPD is automatically selected.3. Click Add to complete the installation.Setting Up the Macintosh Ethernet Port for TCP/IP or AppleTalkPerform the following procedure to set up your Macintosh for TCP/IP:1. Select Network from the System Preferences application, then select TCP/IP.2. Select Built-In Ethernet from the Active Ports menu.3. Specify how you will obtain the IP address from the TCP/IP tab:■ Manually: Specify the IP address, Subnet Mask, Router Address, and Name ServerAddress in the dialog box.■ DHCP: If you wish to use AppleTalk, select the AppleTalk tab and verify that theMake AppleTalk Active box is selected.4. Close the dialog box.Creating an LPR Printer with Mac OS X, Version 10.21. Open the Print Center Utility (located in Utilities in the Applications Directory).2. Click Add.3. Select IP Printing from the drop-down list.4. Enter your printer’s IP address.5. Deselect Use default queue on server box.6. Type AUTO in the Queue Name field.7. Select the appropriate PPD from the list displayed in the Printer Model drop-down list.8. Click Add.
