• Do not place objects on the power cord.• Do not override or disable electrical or mechanical interlocks.• Do not obstruct the ventilation openings. These openings prevent overheating of themachine.• Never push objects of any kind into slots or openings on this equipment. Making acontact with a voltage point or shorting out a part may result in fire or electricalshock.Emergency power offIf any of the following conditions occur, immediately switch off the power to the machineand disconnect the power cord from the electrical outlet. Call an authorized Xerox servicerepresentative to correct the problem.• The machine emits unusual noises or odors.• The power cord is damaged or frayed.• A wall panel circuit breaker, fuse, or other safety device is tripped.• Liquid is spilled into the machine.• The machine is exposed to water.• Any part of the machine is damaged.Electrical supplyThis product shall be operated from the type of electrical supply indicated on theproduct’s data plate label. If you are not sure that your electrical supply meets therequirements, please consult a licensed electrician for advice.WARNINGThis equipment must be connected to a protective earth circuit. This equipment issupplied with a plug that has a protective earth pin. This plug will only fit into anearthed electrical outlet. This is a safety feature. If you are unable to insert the pluginto the outlet, contact a licensed electrician to replace the outlet.CAUTIONAlways connect equipment to a correctly grounded power outlet. If in doubt, havethe outlet checked by a qualified electrician.Disconnect deviceThe power cable is the disconnect device for this equipment. To remove all electricalpower from the machine, disconnect the power cable from the electrical outlet.Xerox®770 Digital Color Press2-2Safety GuideSafety information