Printing to a Phaser 7700 PrinterPhaserMatch and PhaserCal 4.0 User Guide4-37. Ensure the paper in the printer matches the profile you selected.8. Click OK.Note: USB, NetWare, and NetBEUI are not TCP/IP connections.Computers without TCP/IP Connections to the PrinterWhen using a computer without TCP/IP connection to the printer, the driver lists the customTekColor correction selections as Custom Color 1, Custom Color 2, through Custom Color10. To select a custom TekColor correction:1. In the Print screen box, click the Properties button.2. Select the TekColor tab.3. Click the Press Match radio button, and then from the Press Match field, select the colorcorrection you want to use for printing.4. Click on the name Custom Color 1, Custom Color 2, through Custom Color 10.Note: The Custom Color number should be the same one you used when you downloadedthe color correction to the printer.5. Click the Paper/Quality tab.6. Select a print-quality mode.Note: The printer driver's settings for paper and print quality must match the paper typeand print quality selected when creating the device link profile and the calibration shouldhave been done using this same print quality and paper type.7. Ensure the paper in the printer matches the profile you selected.8. Click OK.Note: USB, NetWare, NetBEUI, and AppleTalk are not TCP/IP connections.Printing to a Phaser 7700 PrinterMacintosh OS XThe TekColor corrections created by PhaserMatch work with applications that generateCMYK color values when printing. Applications, such as Adobe PhotoShop and Illustrator,are a couple of applications that can be set up to do this. Other applications, such as MicrosoftWord for Macintosh OS X, generate CIE color values that are not affected by the TekColorcorrections or generate RGB colors that are not supported by the custom color corrections thatyou have created.