|
Version 10.0Page 17 of 160AccXES PJL Interface is one of the following enumerated values: {BLOCK, SUBSTITUTE, SCALE}.Note that this new command supercedes the old MM_MODE_ commands beginning withAccXES V7.5. This is an optional field.<color gamma value> is a float from 0.5 to 2.0 that defines the gamma value for the color curve that isused during the printing process. This is an optional field.<color ink limit value> is an integer from 0% to 100% that defines the ink limit for the color curve thatis used during the printing process. This is an optional field.4.1.11 XESMEDIADEFSimilar to XESMEDIASET, this command is used to set job and/or page parameters that are mediadependent. However, this command is used to change the printer default values rather than only thecurrent job's values.Similar to XESMEDIASET, the syntax of the command is:@PJL COMMENT XESMEDIADEF NAME=MISMATCHMODE=GAMMACYAN=GAMMAMAGENTA=GAMMAYELLOW=GAMM BLACK=INKLIMITCYAN=INKLIMITMAGENTA=INKLIMITYELLOW=INKLIMITBLACK=The arguments are the same as for the XESMEDIASET command.4.1.12 XESMEDIADICTIONARYThis command will report the contents of the AccXES media dictionary including the fold program andtitleblock locations for the defined sizes.Unsupported media sizes will not be displayed via this PJL instruction.After parsing the XESMEDIADICTIONARY command, the controller will echo the command, theappropriate status, and a form-feed back on the sending channel as shown below:@PJL COMMENT XESMEDIADICTIONARY WID: HT: Prg: : titleblock>where:media size: corresponds to one of the possible specifications for PAPER.Status: Enabled/Disabled - Disabled means no printer.Width: Pixel count of nubmer fo scan lines AccXES sends.Height: Number of pixels in the height of a particular sheet size.Fold Program: Program number of foldFoldable flag: T for TRUE - foldable; F for FALSE - not foldableFoldable Range:mm range ("841-3300" representing min and max number of mm for a given fold.
|
