Xerox 850DP - Phaser Color Solid Ink Printer Release Note

Also see for FreeFlow: Installation guide Install guide Security guide User guide Release note

Xerox 850DP - Phaser Color Solid Ink Printer Release Note Manual pdf 20 page image

8.2 Xerox 6030/6050 Wide Format Solution8.2.1 Long PlottingLong plot limits are dependent on the amount of memory in the 6030/6050. Limits are as follows:Amount of MemoryInstalledLong Plot Limit256 MB 3,000 mm512 MB 7,500 mm1 GB 15,000 mmIf the maximum plot length in AccXES (in WebPMT: PRINTER DEFAULTS>PROCESSINGDEFAULTS>MEDIA>MAXIMUM PLOT LENGTH) is set greater than the maximum length of the6030/6050 the image will be truncated.8.2.2 Long CopyingCopy documents should be limited to the maximum length printed by the 6030/6050 printer. Iflonger documents are used the printer may not print them correctly and may hang. Canceling along copy job may require a very long time to complete or may hang the system requiring it to berebooted.8.2.3 Out of Toner reported as “printer needs attention”When the 6030/6050 printer runs out of toner the error message presented in WebPMT is simply“printer needs attention”. The user needs to refer to the printer user interface to determine theproblem resolution required.8.3 Scanner8.3.1 Clear Last ImageWhen the “Clear Last Image” feature is selected on the Xerox Wide Format Scan System, it maytake a few minutes for a Photo or Color mode scanned document to clear out. After scanning adocument, this feature is accessed by selecting the “C” key on the scanner. It will bring up the“CLEAR SCANNED IMAGE” screen. Use the “Next” button to select “CLEAR LAST IMAGE”, andthen press “ENTER”.8.3.2 Invert Feature and Recall Last JobScan a document. Press the Transform key. Select “Recall Last Job”. If the Invert feature(changes dark to light and vice versa) is selected before printing the recalled document, thedocument will not be inverted. It will need to be rescanned to get the inverted image.Page 20