Xerox AltaLink C8030 Customer Expectation & Installation Manual

Also see for AltaLink C8030: Installation and configuration guide Security guide

Xerox AltaLink C8030 Customer Expectation & Installation Manual Manual pdf 22 page image

Customer Expectation and Installation Guide 19Media and SubstrateFor more detailed information on throughput materials, please refer to the Xerox Materials Usage Guide and the Recommended Materials List.http://www.xerox.com/downloads/usa/en/supplies/rml/supplies_rml_-C8000-series.pdf Using coated (e.g., gloss, matte coated or photo finished / proofing) and/ or Cardstock (i.e., >90lb Index / 164 gsm) stock may result in degradedreliability performance. Customers using these materials exclusively or extensively will see decreased performance as it relates to image quality andproduct reliability. Attempts to feed heavier than recommended paper stocks, and/or misuse of the media settings, may cause machine damage or poor image quality.Using media at run modes other than that recommended for the grade may cause poor image quality and machine damage. Envelope printing should not be used as a primary application Envelopes without windows are supported through the bypass tray in sizes Monarch, DL, C5, and Number 10 (other custom sizes are supported as well).Envelope feeding reliability is highly dependent on the envelope used and the area coverage of the image being affixed to the envelope. The optional envelope tray replaces Tray 1. Customer is responsible for installing the envelope tray. Specialty media may not provide optimum image quality at the extremes of the environmental rangeTransparencies The following premium transparencies are available for use: 3R3108 or 3R12505 (3R98205 for A4). Transparencies are supported out of all trays(Trays 1 – Tray 5, Bypass) if fed in the correct manner. These premium transparencies are specifically designed to provide optimum print quality. Use of other transparencies may cause machine damage and result in excessive service calls.Xerox SustainabilityEnvironmental Features C8000 series delivers cutting-edge reductions in energy consumption. Conserve Energy with Green Technologies EA Toner: With ultra low-melt technology achieves minimum fusing temperature at 68 degrees F (20 degrees C) lower than conventional toner foreven more energy savings and brilliant glossy output even on ordinary paper. Induction heating: The newly developed, heat-efficient IH fuser does not require preheating, which helps reduce power consumption in standbymode by 44% compared to a resistance heating device. Plus, the device recovers from sleep mode in less than 10 seconds. LED scanner: The power consumption of the scanner using LED lighting is 1/3 of traditional scanners using fluorescent lamps. Manage Resource Usage and Print Responsibly Energy Management. With Cisco® EnergyWise, enabled by Xerox® Power MIB (Management Information Base), you can control, manage and reportyour device’s power consumption information, and set optimal power states and timeout intervals. Earth-smart printing. Innovative new Earth Smart feature allows you to choose the most environmentally sensitive options for your print jobs.