Xerox AltaLink C8030 Customer Expectation & Installation Manual

Also see for AltaLink C8030: Installation and configuration guide Security guide

Xerox AltaLink C8030 Customer Expectation & Installation Manual Manual pdf 33 page image

Customer Expectation and Installation Guide 30EFI Controller Option:Space Requirements / Service Space EnvelopeThe Fiery Network Controller stands beside or behind the print engine. The Fiery connects to the Print engine Ethernet port via 10ft. crossover cable.The Fiery Network Controller was designed to be customer installable; however, it can be a billed Xerox install.Physical specificationsOperating environment: Temperature: +10°C to +40°C— Relative humidity: 10% to 85% (non-condensing)— Power supply rating: 60 W External 12V— Power consumption: (Typical) 100W, 1 AMP, (Maximum) 220 W, 2 AMP Dimensions (Depth x Width x Height):— 3-7/8”W x 7-3/4”D x 7-7/8”H (dimensions with support stand)— 2-1/4”W x 7-3/4”D x 7-5/8”H (dimensions without support stand)— Weight: 3 poundsSpace requirementRecommend a minimum of 1” clearance for proper air flow to the fan.Environmental RequirementsThe Fiery Network Controller has a separate power cord which plugs into the customer’s wall outlet.Customer is responsible for supplying one network drop to enable the install.Fiery Network Controller OptionsSupported Purchasable Options Fiery Options Bundle— Includes: Fiery Spot On, Auto Trapping, Hot Folders/Virtual Printers Network SwitchNetwork SpecificationsProtocol Printing Services Supported Frame TypesTCP / IP (IPv4 & IPv6)BonjourLPD / LPRPort 9100SMBIPPEmail (POP3/IMAP)SLPWSDEthernetNote: IPv6 connectivity to the MFP will not be operational when EFI controller is connected.Fiery Network Controller Specifications Intel Pentium GX-424CC at 2.4GHz 2 GB RAM 500 GB hard drive 10/100/1000 BaseT RJ45 Network connectivity 4 USB Ports for media printing Linux Operating System with Fiery System 200