Xerox ColorQube 8700 Reference Manual

Also see for ColorQube 8700: User guide Specifications Guide Secure installation and operation System administrator guide

Xerox ColorQube 8700 Reference Manual Manual pdf 16 page image

CQ8700-8900Customer Support Page 16Hole PunchThis command indicates hole punches for a print job on a device with hole punch capability.Note: Some hole punch options may not be available on every product model.PJL COMMENT Command DSC Comment Command PS@PJL COMMENTOID_ATT_PUNCH int;%%OID_ATT_PUNCH int; << /Punch int1 /PunchDetails << /Type 6/NumHoles int2 >> >> setpagedeviceWhere int is:0 = Punch Off1 = Punch On2 = Use 2 Hole Punch3 = Use 3 Hole Punch4 = Use 4 Hole PunchNote: int 1 will be emitted to invoke the default punchsetting on the device.Where int1 is:0 = Punch Off4 = Punch On (after each showpage or copypage operation)Where int2 is:0 = Punch Off1 = Punch On2 = 2 Hole Punch3 = 3 Hole Punch4 = 4 Hole PunchNote: Setting NumHoles to 1 causes a punchwith the default number of holes.FoldThis command indicates an optional fold type generated by the professional finisher. The short edge feed command isalso required to use the booklet fold command.Note: Some fold options may not be available on every product model.PJL COMMENT Command DSC Comment Command PS@PJL COMMENTOID_ATT_FOLD string;%%OID_ATT_FOLDOID_VAL_FOLD_string;<< /Fold int1 /FoldDetails << /Type 5/FoldMethod int2 >> >> setpagedeviceWhere string is:TRIFOLDCTRIFOLDZZFOLDWhere int1 is:0 = No Fold3 = Fold at end of setWhere int2 is:1 = TriFold C2 = TriFold Z3 = Z-Fold HalfSheetNote:• TriFold C requires a LeadingEdge 0 and/or OID_VAL_FEED_EDGE_SHORT_LEADING command toinsure SEF feeding.• TriFold Z requires a LeadingEdge 0 and/or OID_VAL_FEED_EDGE_SHORT_LEADING command.