Xerox CopyCentre 133 User Manual

Also see for C123 Copycentre: Manual Installation guide Evaluator guide Brochure & specs Install guide

Xerox CopyCentre 133 User Manual Manual pdf 14 page image

2 Operation with Windows 95/98/Me14 Xerox WorkCentre/WorkCentre Pro 123/128/133 PostScript® User GuideOptions Tab SettingsThis section describes the settings in the Options tab.Select the items in Hardware Options and change them in the Change box below. To use thisfunction, it is necessary to make appropriate settings in this tab.NOTE: You can restore defaults by clicking [Restore Default].SettingsHard Disk - Specifies whether or not the Hard Disk (optional) is installed. If it is, set to[Available].Tray Options - Specifies the paper tray type installed on the machine.When [2-Tray Unit] is selected, Tray 3 and Tray 4 can be used.When [2-Tray Unit (High Capacity)] is selected, Tray 3 and Tray 4 can be used as the highcapacity feeder.Finisher - Specifies if the Finisher (optional) is installed. If it is, set to [Available].Paper Size Setting - Specifies the paper size group for different areas to enable the selectionof paper size common to that location.Switch Paper Size (8K/16K) - Indicate your language preference to enable the set of 8K and16K paper size that is best suited to your needs.Memory - Specify the amount of printer memory.