Xerox CopyCentre 133 User Manual

Also see for C123 Copycentre: Manual Installation guide Evaluator guide Brochure & specs Install guide

Xerox CopyCentre 133 User Manual Manual pdf 34 page image

4 Operation with Windows 2000, Windows XP and Windows Server 200334 Xerox WorkCentre/WorkCentre Pro 123/128/133 PostScript® User GuideSettingsOutput Destination - Specifies the output destination.NOTE: The items that can be selected vary according to whether the optional side traykit or finisher has been installed.Offset Stacking - The position of individual jobs or sets of copies are shifted to eitherside of the output tray to enable easy separation.Feed Separators from - Specifies the paper tray that transparency dividers are to befed from. When [Auto] is selected, the tray set on the machine is used as the feeddestination.Print on Separators - Specifies whether or not to print on the transparency dividers aswell as the transparency.Paper Type (Separators) - Specifies a paper type for the transparency divider.Stapling - Specifies whether to staple printed documents and the position of the staple.You can staple 2 to 50 sheets of 80 g/m2 or lighter paper.NOTE: You cannot use staples in the following situations.– When anything other than Finisher Tray is selected as the Output Destination inthe Advanced tab.– When Job Offset is selected.Bypass Feed Orientation - Specifies the paper orientation when printing from thebypass tray. When feeding the short edge of the paper first, select [Landscape]. Whenfeeding the long edge of the paper, select [Portrait].Print Mode - Specifies whether to give priority to the print speed or the image quality.Halftone - Specifies the halftone settings for printing.Select [Fine Dots] for the small size halftone dot commonly used in PostScript.Select [Thick Dots] for coarser dots than the Fine Dots setting.Select [Type 3] for the same halftone setting that is used in PCL.Image Enhancement - Specifies whether to use the Image Enhancement function.Selecting [On] smooths out boundaries when printing. This reduces jagged edges byartificially increasing the resolution of the image. When printing a bitmapped imagecomposed of coarse halftone dots, smooth color gradation is impossible in certainsituations. In this case, select [Off].Draft Mode - Specifies whether or not to reduce the amount of toner used whenprinting drafts. When [On] is selected, the overall printed color becomes lighter. This isbest for printing documents when high print quality is not necessary.Custom Paper Auto Orientation - Specifies whether or not to correct the orientationof the custom paper.Substitute Tray - Specifies what action to take when the paper for the print size is notloaded in the machine.Use Printer Settings - Use the printer settings. The settings can be confirmed onthe control panel.