6. Run your print job.• The paper is fed accurately without skew and the printed output is satisfactory;your task is complete.• The paper is skewed and the printed output is unsatisfactory; proceed to the nextstep.7. Pull out the tray slowly until it stops.8. Return the rear skew adjustment lever to its left, default position.9. Slide the right-side skew adjustment lever toward the front of the paper tray.10. Gently push in the tray until it comes to a stop.11. From the Tray Properties window, enter the correct paper information, including size,type, weight, and if necessary, paper curl and/or alignment option.12. Select OK to save the information and close the Tray Properties window.13. Run your print job.• The paper is fed accurately without skew and the printed output is satisfactory;your task is complete.• The paper is skewed and the printed output is unsatisfactory; proceed to the nextstep.14. Pull out the tray slowly until it stops.15. Return the right-side skew adjustment lever toward the rear of the paper tray; this isits default position.16. Gently push in the tray until it comes to a stop.17. If you are still having skew adjustment problems, refer to the Advanced Stock Setupinformation located in the System Administration Guide.OHCF problem solvingClearing OHCF jamsTipAlways ensure that all paper jams, including any small ripped pieces of paper, are clearedbefore proceeding with your print jobs.NoteRemedies differ according to the paper jam location. Follow the instructions displayedto remove the jammed paper.13-9Xerox® D110/D125/D136 PrinterUser GuideOversized High Capacity Feeder (OHCF), 1 or 2 trays (Trays 6/7)
